BeeSafe Systems
TESTING & CERTIFICATION

 

The Beesafe System has passed all testing to ASME A112.19.8-2007 a2008 with IAPMO R&T.

 

The Beesafe System is now compliant with the Virginia Graeme Baker Pool and Spa Safety Act.

 

The listing can also be found at www.iapmo.org by following this link.

SP-6044 BEESAFE SYSTEMS Suction Fittings

 

The Beesafe System has completed and passed independent QQ Qualification testing!

Our testing was completed without a sump, so the system can be used with any size sump or without a sump. The open area inside the system provides an adequate sump with piping up to 8 inches.

Flow Testing Exceeds Expectations!

1- Headloss Curve - Design flow rate 100%= 792 GPM
2 -Suction Hair Entrapment - Tested as high as 2,330 GPM with no entanglement
3 - Body Entrapment - With use of equation 2.3.1.2 of the reference standard the allowable flow rate would be 6,071.7 GPM
4 - Suction Fitting Limb Entrapment - No openings allow passage of the 1 inch test cylinder
5 - Suction fitting finger admittance - neither first or second articulation joints admitted into the bee Safe system.

 

The BeeSafe System addresses all hazards associated with suction entrapment!

 

The BeeSafe System Simply Is A Better Answer To Suction Entrapment!